Mitsubishi Lancer Owners Manual

Heated seats
Seat and seat belts / Front seat / Heated seats

The heated seats can be operated with the ignition switch in the “ON” position. Operate the switch as indicated by arrows.

The indication lamp (A) will illuminate while the heater is on.

Mitsubishi Lancer: Heated seats. 1 (HI)- Heater high (for quick heating).

1 (HI)- Heater high (for quick heating).
2- Heater off.
3 (LO)- Heater low (to keep the seat warm).

Mitsubishi Lancer: Heated seats. Caution Caution

► Switch off seat heaters when not in use.
► Operate in the high position for quick heating.
Once the seat is warm, set the heater to low to keep it warm. Slight variations in seat temperature may be felt while using the heated seats. This is caused by the operation of the heater’s internal thermostat and does not indicate a malfunction.
► If the following types of persons use the heated seats, they might become too hot or receive minor burns (red skin, heat blisters, etc.):
• Children, elderly or ill people
• People with sensitive skin
• Excessively tired people
• People under the influence of alcohol or sleep inducing medication (cold medicine, etc.)
► Do not place heavy objects on the seat or stick pins, needles, or other pointed objects into it.
► Do not use a blanket, cushion, or other material with high heat insulation properties on the seat while using the heater; this might cause the heater element to overheat

Mitsubishi Lancer: Heated seats. Caution Caution

► When cleaning the seat, do not use benzene, kerosene, petrol, alcohol, or other organic solvents; these might damage the surface of the seat and also the heater element.
► If water or any other liquid is spilled on the seat, allow it to dry thoroughly before attempting to use the heater.
► Turn the heater off immediately if it appears to be malfunctioning during use.


© 2024 www.mitsuguide.com. All Rights Reserved.