Mitsubishi Lancer Owners Manual

Useful voice commands
For pleasant driving / Bluetooth® 2.0 interface / Useful voice commands

Help function

The Bluetooth® 2.0 interface is equipped with a help function.

If you say “Help” when the system is waiting for a voice command input, the system will tell you a list of the commands that can be used under the circumstances.

Cancelling

There are two cancel functions.

If you are at the main menu, say “Cancel” to exit from the Bluetooth® 2.0 interface.

If you are anywhere else within the system, say “Cancel” to return to the main menu.

Confirmation function setting

The Bluetooth® 2.0 interface is equipped with a confirmation function.

With the confirmation function activated, you are given more opportunities than normal to confirm a command when making various settings to the Bluetooth ® 2.0 interface. This allows you to decrease the possibility that a setting is accidentally changed.

The confirmation function can be turned on or off by following the steps below.

1. Press the SPEECH button.
2. Say “Setup”.
3. Say “Confirmation prompts”.
4. The voice guide will say “Confirmation prompts are <on/off>. Would you like to turn confirmation prompts <off/on>”.
Answer “Yes” to change the setting or answer “No” to keep the current setting.
5. The voice guide will say “Confirmation prompts are <off/on>” and then the system will return to the main menu.

Security function

It is possible to use a password as a security function by setting a password of your choice for the Bluetooth® 2.0 interface.

When the security function is turned on, it is necessary to make a voice input of a 4-digit password in order to use all functions of the Bluetooth® 2.0 interface, except for reception.

Setting the password

Use the following procedure to turn on the security function by setting a password.

1. Press the SPEECH button.

2. Say “Setup”.

3. Say “Password.” 4. The voice guide will say “Password is disabled.

Would you like to enable it?” Answer “Yes.” Answer “No” to cancel the setting of the password and return to the main menu.

5. The voice guide will say “Please say a 4-digit password. Remember this password. It will be required to use this system”.

Say a 4-digit number which you want to set as a password.

6. For confirmation purposes, the voice guide will say “Password <4-digit password>. Is this correct?” Answer “Yes.” Answer “No” to return to the password input in Step 5.

7. When the registration of the password is completed, the voice guide will say “Password is enabled” and the system will return to the main menu.

Mitsubishi Lancer: Useful voice commands. ► Password will be required to access the system after the next ignition cycle. Note

► Password will be required to access the system after the next ignition cycle.
► It is required for a little time after engine stop that the entered password is actually recorded in the system.
If the ignition switch is made to the “ON” or “ACC” position or the engine is started immediately after engine stop, there is a case when the entered password is not recorded in the system. At this time, please try to enter the password again.

Entering the password

If a password has been set and the security function is enabled, the voice guide will say “Hands-free system is locked. State the password to continue” when the SPEECH button is pressed to enter voice recognition mode. Say the 4-digit password number to enter the password.

If the entered password is wrong, the voice guide will say “<4- digit password>, Incorrect password.

Please try again”. Enter the correct password.

Mitsubishi Lancer: Useful voice commands. ► You can re-enter the password as many times as you want. Note

► You can re-enter the password as many times as you want.
► If you have forgotten your password, say “Cancel” to quit the voice input mode and then check with a MITSUBISHI MOTORS Authorized Service Point.

Disabling the password

Use the following procedure to turn off the security function by disabling the password.

Mitsubishi Lancer: Useful voice commands. ► System must be unlocked to disable the password. Note

► System must be unlocked to disable the password.

1. Press the SPEECH button.

2. Say “Setup”.

3. Say “Password.” 4. The voice guide will say “Password is enabled.

Would you like to disable it?” Answer “Yes.” Answer “No” to cancel the disabling of the password and return to the main menu.

5. When the disabling of the password is completed, the voice guide will say “Password is disabled” and the system will return to the main menu.


© 2024 www.mitsuguide.com. All Rights Reserved.