Mitsubishi Lancer Owners Manual

To unlock
Locking and unlocking / Keyless entry system / To unlock

Press the UNLOCK switch (2). All the doors and the rear hatch will be unlocked. If the front room lamp switch (if so equipped) is in the “DOOR” position and the rear room lamp switch (except for vehicles equipped with the sunroof) is in the middle (•) position at this time, the room lamp will come on for approximately 15 seconds and the turn-signal lamps will blink twice.

Except for vehicles for Russia, Kazakhstan and Ukraine, the position and tail lamps can also be set to turn on for about 30 seconds.

Refer to “Instruments and controls: Welcome light”.

Mitsubishi Lancer: To unlock. ► For vehicles equipped with the central door lock switch, the door and rear Note

► For vehicles equipped with the central door lock switch, the door and rear hatch unlock function can be set so that only the driver’s door unlocks when the UNLOCK switch (2) is pressed once.

If the door and rear hatch unlock function is set to work as described above, all the doors and the rear hatch unlock when the UNLOCK switch is pressed two times in succession.

Refer to “Setting of door and rear hatch unlock function”.

► The indication lamp (3) comes on each time a switch is pressed.

► For vehicles with the mirror retractor switch, the outside rear-view mirrors automatically retract or extend when all doors and the rear hatch are locked or unlocked using the remote control switches of the keyless entry system.

Refer to “Outside rear-view mirrors”.

► If the UNLOCK switch (2) is pressed and no door or rear hatch is opened within approximately 30 seconds, relocking will automatically occur.

► It is possible to modify functions as follows: For further information, please contact your MITSUBISHI MOTORS Authorized Service Point.

On vehicles equipped with MITSUBISHI Multi-Communication System (MMCS), screen operations can be used to make the adjustment.

Refer to the separate owner’s manual for details.

• The time for automatic relocking can be changed.
• Activating the operation confirmation function (blinking of the turn-signal lamps) only during locking, or only during unlocking.
• The confirmation function (this indicates locking or unlocking of the doors and rear hatch with the turn-signal lamps blinking) can be deactivated.
• The number of times the turn-signal lamps are flashed by the confirmation function can be changed.


© 2024 www.mitsuguide.com. All Rights Reserved.