Mitsubishi Lancer Owners Manual

SRS warning lamp/display
Seat and seat belts / Supplemental restraint system (SRS) - airbag / SRS warning lamp/display

Warning lamp

Mitsubishi Lancer: SRS warning lamp/display.

Mitsubishi Lancer: SRS warning lamp/display. If there is an error in the system, the warning lamp will come on and the warning

If there is an error in the system, the warning lamp will come on and the warning display will appear on the information screen in the multi-information display.

Under normal conditions, the warning lamp comes on when the ignition switch is turned to the “ON” position and goes off a few seconds later.

The warning lamp will also come on and remain on when the SRS airbags and the seat belt pretensioner system have been activated.

The warning lamp/display is used for both SRS airbag warnings and seat belt pretensioner system warnings.

Mitsubishi Lancer: SRS warning lamp/display. Warning Warning

► There may be a system error if the warning lamp/display appears as indicated. In such cases, an SRS airbag or a seat belt pretensioner system may not function properly in a collision. Have your vehicle checked by a MITSUBISHI MOTORS Authorized Service Point.
• Even when the ignition switch is in the “ON” position, the warning lamp does not come on or it remains on a few seconds later
• The warning lamp comes on while driving
• The warning display appears while driving


© 2024 www.mitsuguide.com. All Rights Reserved.