Mitsubishi Lancer Owners Manual

Cancelling the alarm
Locking and unlocking / Security alarm system / Cancelling the alarm

It is possible to halt the activation of an alarm using the following methods: ► Pressing the LOCK or UNLOCK switch on the remote control switch.
(After pressing the LOCK switch, the vehicle will lock if all the doors and rear hatch are closed, after which the system preparation mode will once again go into effect.)
► Turning the ignition switch to the “ON” position.

► Holding the keyless operation key and locking and unlocking the doors and the rear hatch using the keyless operation function (vehicles equipped with the keyless operation system).

Mitsubishi Lancer: Cancelling the alarm. ► When the ignition switch is turned to the “ON” position, the buzzer sounds Note

► When the ignition switch is turned to the “ON” position, the buzzer sounds 4 times.
This operation indicates that the alarm was activated while the vehicle was parked.
Please check the inside of the vehicle to confirm that nothing was stolen.
► Even if the battery is disconnected, the alarm activation memory will not be erased.


© 2020 www.mitsuguide.com. All Rights Reserved.