Mitsubishi Lancer Owners Manual

Front room & map lamps
Maintenance / Replacement of lamp bulbs / Front room & map lamps

When replacing the bulb, put the front room & map lamps switch into the “OFF” position.

1. Insert a straight blade (or minus) screwdriver with a cloth over its tip into the notch of the lamp assembly. Gently pry to remove the lens.

Mitsubishi Lancer: Front room & map lamps. 2. While holding down the tab (A), pull out the bulb.

2. While holding down the tab (A), pull out the bulb.

Mitsubishi Lancer: Front room & map lamps. 3. To install the bulb, perform the removal steps in reverse.

3. To install the bulb, perform the removal steps in reverse.

Mitsubishi Lancer: Front room & map lamps. ► When mounting the lens, align the tab (B) to the hole on the vehicle body. Note

► When mounting the lens, align the tab (B) to the hole on the vehicle body.

Mitsubishi Lancer: Front room & map lamps. Rear room lamp


© 2020 www.mitsuguide.com. All Rights Reserved.