Mitsubishi Lancer Owners Manual

Position lamps (except for vehicles equipped with high intensity discharge headlamps)
Maintenance / Replacement of lamp bulbs / Position lamps (except for vehicles equipped with high intensity discharge headlamps)

1. For petrol-powered vehicles equipped with turbocharger, when replacing the bulb on the left side, remove the bolt (A) holding down the relay box and move the relay box towards the rear of the vehicle.

Mitsubishi Lancer: Position lamps (except for vehicles equipped with high intensity discharge headlamps). : Front of the vehicle

: Front of the vehicle

2. For petrol-powered vehicles equipped with turbocharger, when replacing the bulb on the right side, lift up the engine coolant reservoir (B).

Mitsubishi Lancer: Position lamps (except for vehicles equipped with high intensity discharge headlamps). : Front of the vehicle

: Front of the vehicle

3. When replacing the bulb on the right side of the vehicle in case of diesel-powered vehicles, turn the steering wheel to the left to create enough work space. And then, remove the clips (C) and screws (D) to turn up the cover (E).

Mitsubishi Lancer: Position lamps (except for vehicles equipped with high intensity discharge headlamps). 4. Turn the socket (F) anticlockwise to remove it.

4. Turn the socket (F) anticlockwise to remove it.

Mitsubishi Lancer: Position lamps (except for vehicles equipped with high intensity discharge headlamps). : Front of the vehicle

: Front of the vehicle

5. Pull the bulb out of the socket.

Mitsubishi Lancer: Position lamps (except for vehicles equipped with high intensity discharge headlamps). 6. To install the bulb, perform the removal steps in reverse.

6. To install the bulb, perform the removal steps in reverse.


2020 www.mitsuguide.com. All Rights Reserved.