Mitsubishi Lancer Owners Manual

Manual mode
For pleasant driving / Digital clock / Manual mode

The manual mode is also available in case the automatic mode shows the incorrect time when the adjacent local RDS stations are located in a different time zone. Refer to “Radio data system (RDS)” on pages 5-22, 5-36.

Mitsubishi Lancer: Manual mode. Set the time by pressing the various buttons as described below.

Set the time by pressing the various buttons as described below.

1. Keep the CLOCK button pressed until the time display flashes.
2. Press the appropriate buttons to adjust the time.

“H” button - To adjust the hour
“M” button - To adjust the minutes
“:00” button - To reset the minutes to zero
10:00 - 10:29......Changes to 10:00
10:30 - 10:59......Changes to 11:00

3. Once the time is set, press the “DISP” button, and the time display will stop flashing.

When a time adjustment has been made, the flashing stops automatically.

Mitsubishi Lancer: Manual mode. ► If the battery cables are disconnected during repairs or for any other reason, Note

► If the battery cables are disconnected during repairs or for any other reason, reset the clock to the correct time after they are reconnected.
► The digital clock does not have a second display.
When the “minute” display is adjusted and reset to zero, the clock begins at zero seconds for the selected minute.


© 2024 www.mitsuguide.com. All Rights Reserved.