Mitsubishi Lancer Owners Manual
Operating the system in automatic modeFor pleasant driving / Automatic air conditioning / Operating the system in automatic mode
In normal conditions, use the system in the AUTO mode and follow these procedures:
1. Set the blower speed selection dial to the “AUTO” position.
2. Set the temperature control dial to the desired temperature.
3. Set the mode selection dial to the “AUTO” position.
The outlet position (except 
),
To stop the system, turn the blower speed selection dial to the “OFF” position.
► When using the air conditioning, the idling speed may slightly increase as the air conditioning compressor is switched on/off automatically. While the vehicle equipped with CVT or Twin Clutch SST is stationary, fully depress the brake pedal to prevent the vehicle from creeping.
Note
► While the engine coolant temperature is low, the temperature of the air from
the heater will be cool/cold until the engine warms up, even if you have selected
warm air with the dial. To prevent the windscreen and windows from fogging up, the
ventilator mode will be changed to
and the blower speed will be reduced.
