Mitsubishi Lancer Owners Manual

“ASC OFF” switch
Starting and driving / Active stability control (ASC) / “ASC OFF” switch

The ASC is automatically activated when the ignition switch is turned to the “ON” position. You can deactivate the system by pressing down the “ASC OFF” switch for 3 seconds or longer.

When the ASC is deactivated, the display/indicator will turn on. To reactivate the ASC, momentarily press the “ASC OFF” switch; the display/indicator is turned off.

Mitsubishi Lancer: “ASC OFF” switch.

Mitsubishi Lancer: “ASC OFF” switch. Caution Caution

► For safety reasons, the “ASC OFF” switch should be operated when your vehicle is stopped.
► Be sure to keep the ASC on while driving in normal circumstances.

Mitsubishi Lancer: “ASC OFF” switch. ► When moving out of mud, sand or fresh snow, pressing the accelerator pedal Note

► When moving out of mud, sand or fresh snow, pressing the accelerator pedal may not allow the engine speed to increase. In such situations, temporarily turning off the ASC with the “ASC OFF” switch will make it easier to move out your vehicle.
► Using the “ASC OFF” switch turns off both the stability control function and the traction control function.
► If you continue to press the “ASC OFF” switch after the ASC is turned off, the “mistaken operation protection function” will activate and the ASC will turn back on.


© 2024 www.mitsuguide.com. All Rights Reserved.