Mitsubishi Lancer Owners Manual

Gearshift lever position display
Starting and driving / Twin Clutch SST (Sport Shift Transmission) / Gearshift lever position display

When the ignition switch is turned to the “ON” position, the position of the gearshift lever is indicated in the multi-information display.

Mitsubishi Lancer: Gearshift lever position display. In addition, when the vehicle is driven with the gearshift lever in the “D” (DRIVE)

In addition, when the vehicle is driven with the gearshift lever in the “D” (DRIVE) position, the forward gear number is shown.

Mitsubishi Lancer: Gearshift lever position display. If the gearshift lever position display

If the gearshift lever position display Mitsubishi Lancer: Gearshift lever position display. With the gearshift lever in the “R” (REVERSE) position, if the gearshift lever blinks and the buzzer beeps

With the gearshift lever in the “R” (REVERSE) position, if the gearshift lever position display Mitsubishi Lancer: Gearshift lever position display. buzzer beeps, the transmission gears have not properly engaged. To correct this blinks and the buzzer beeps, the transmission gears have not properly engaged. To correct this situation, the following procedure must be performed.

1. Depress the brake pedal with your right foot and place the gearshift lever in the “N” (NEUTRAL) position.
2. Again place the gearshift lever in the “R” (REVERSE) position and confirm that the gearshift lever position display has stopped blinking and that the buzzer has stopped beeping.
3. Repeat 1 and 2 above if the gearshift lever position display continues to blink and the buzzer beeps.

Mitsubishi Lancer: Gearshift lever position display. Warning Warning

► To avoid unintended vehicle movement when the gearshift lever position display Mitsubishi Lancer: Gearshift lever position display. beeps, keep brake pedal applied with your right foot and do not depress the accelerator blinks and the buzzer beeps, keep brake pedal applied with your right foot and do not depress the accelerator pedal.

When the gearshift lever position display is not showing

There may be a problem in the Twin Clutch SST.

If this occurs, the safety device operates and prevents the vehicle from moving. Perform the following procedure.

1. Park your vehicle in a safe place and stop the engine.
2. Restart the engine.

If the gearshift lever position display is shown and the vehicle can move after this procedure is performed, there is no malfunction.

If the gearshift lever position display is not shown and the vehicle cannot move, or if this problem occurs repeatedly, have the vehicle checked by a MITSUBISHI MOTORS Authorized Service Point as soon as possible.


© 2020 www.mitsuguide.com. All Rights Reserved.