Mitsubishi Lancer Owners Manual

Lamps (headlamps, fog lamp, etc.) auto- cutout function
Instruments and controls / Combination headlamps and dipper switch / Lamps (headlamps, fog lamp, etc.) auto- cutout function

► If, while the lamp switch is in the “ ” position, the ignition switch is turned to the “LOCK” position or “ACC” position, or the key is removed from the ignition switch, the lamps automatically go out when the driver’s door is opened.

[When the engine was started using the key] If the key is removed and the driver’s door is opened, a buzzer sounds at a high pitch intermittently to remind the driver to turn off the lamps.

[When the engine was started using the keyless operation function] If the ignition switch is turned to the “LOCK” position and the driver’s door is opened, a buzzer sounds at a high pitch intermittently to remind the driver to turn off the lamps.

► If the ignition switch is turned to the “LOCK” position or “ACC” position, or the key is removed from the ignition switch, while the lamp switch is in the Mitsubishi Lancer: Lamps (headlamps, fog lamp, etc.) auto- cutout function. on for about 3 minutes while the driver’s door is shut and will then automatically position, the lamps will remain on for about 3 minutes while the driver’s door is shut and will then automatically go out.

Mitsubishi Lancer: Lamps (headlamps, fog lamp, etc.) auto- cutout function. ► The lamp auto-cutout will not function when the lamp switch is in the Note

► The lamp auto-cutout will not function when the lamp switch is in the Mitsubishi Lancer: Lamps (headlamps, fog lamp, etc.) auto- cutout function. ► The lamp auto-cutout function can also be disabled.position.

► The lamp auto-cutout function can also be disabled.

For further information, we recommend you to consult a MITSUBISHI MOTORS Authorized Service Point.

On vehicles equipped with MITSUBISHI Multi-Communication System (MMCS), screen operations can be used to make the adjustment.

Refer to the separate owner’s manual for details.

When you want to keep the lamps on:

1. Turn the lamp switch in the “OFF” position while the ignition switch is in the “LOCK” or “ACC” position.
2. Turn on the lamps with the switch in the Mitsubishi Lancer: Lamps (headlamps, fog lamp, etc.) auto- cutout function. will remain on. position again, then the lamps will remain on.

Mitsubishi Lancer: Lamps (headlamps, fog lamp, etc.) auto- cutout function. ► When the engine was started using the key, if the driver’s door is opened and Note

► When the engine was started using the key, if the driver’s door is opened and the key is removed, the lamp monitor buzzer sounds at a high pitch intermittently.

The buzzer stops when the driver’s door is closed. (The warning is also displayed on the multi-information display.) The buzzer stops in the following manner.

• Turn the lamp switch to the “OFF” position.
• Close the driver’s door.

► When the engine was started using the keyless operation function, if the driver’s door is opened and the ignition switch is in the “LOCK” position, the lamp monitor buzzer sounds at a high pitch intermittently.

The buzzer stops when the driver’s door is closed. (The warning is also displayed on the multi-information display.) The buzzer stops in the following manner.

• Turn the lamp switch to the “OFF” position.
• Close the driver’s door.


© 2020 www.mitsuguide.com. All Rights Reserved.