Mitsubishi Lancer Owners Manual

Brake warning lamp
Instruments and controls / Warning lamps / Brake warning lamp

Mitsubishi Lancer: Brake warning lamp. This lamp illuminates when the ignition switch is turned to the “ON” position,

This lamp illuminates when the ignition switch is turned to the “ON” position, and goes off after a few seconds.

Always make sure that the lamp goes off before driving.

With the ignition switch in the “ON” position, the brake warning lamp illuminates under the following conditions: ► When the parking brake lever has been engaged.
► When the brake fluid level in the reservoir falls to a low level.
► When the brake force distribution function is not operating correctly.

Mitsubishi Lancer: Brake warning lamp. Caution Caution

► In the situations listed below, brake performance may be compromised or the vehicle may become unstable if brakes are applied suddenly; consequently, avoid driving at high speeds or applying the brakes suddenly.
Furthermore, the vehicle should be brought to a stop in a safe location and to have it checked.
• The brake warning lamp does not illuminate when the parking brake is applied or does not turn off when the parking brake is released.
brake warning lamp illuminate at the same time For details, refer to “ABS warning lamp”.
• The brake warning lamp remains illuminated during driving.
► The vehicle should be brought to a halt in the following manner when brake performance has deteriorated.
• Depress the brake pedal harder than usual.
Even if the brake pedal moves down to the very end of its possible stroke, keep it pressed down hard.
• Should the brakes fail, use engine braking to reduce your speed and pull the parking brake lever.
Depress the brake pedal to operate the stop lamp to alert the vehicles behind you.


© 2020 www.mitsuguide.com. All Rights Reserved.