Mitsubishi Lancer Owners Manual

Information screen (when the ignition switch is turned from “OFF” to “ON”)
Instruments and controls / Multi-information display / Information screen (when the ignition switch is turned from “OFF” to “ON”)

When the ignition switch is turned to the “ON” position, the display screen switches in the following order.

Mitsubishi Lancer: Information screen (when the ignition switch is turned from “OFF” to “ON”). 1- Screen when the ignition switch is “OFF”

1- Screen when the ignition switch is “OFF”
2- System check screen
3- Screen when the ignition switch is “ON”

System check screen

When the ignition switch is turned to the “ON” position, the system check screen is displayed for about 4 seconds. If there is no fault, information screen (when the ignition switch is “ON” ) is displayed.

If there is a fault, the screen changes to warning display.

Refer to “Warning display list (when the ignition switch is “ON”)”.

Mitsubishi Lancer: Information screen (when the ignition switch is turned from “OFF” to “ON”). Note

Mitsubishi Lancer: Information screen (when the ignition switch is turned from “OFF” to “ON”). ► The system check screen display varies depending on the customer’s equipment. Note

► The system check screen display varies depending on the customer’s equipment.

Service reminder

When the time for periodic inspection arrives, the warning display is displayed for a few seconds after the ignition switch “ON”. Refer to “Service reminder”.

Mitsubishi Lancer: Information screen (when the ignition switch is turned from “OFF” to “ON”). ACD (Active centre differential system) control mode display screen


© 2020 www.mitsuguide.com. All Rights Reserved.